El RUTC50 es un router industrial bajo tecnología 5G especialmente adecuado para comunicaciones de alta velocidad y demanda de tráfico. Gracias a disponer de dual SIM, 5 puertos Gigabit y dual-band Wi-Fi 6 de doble banda con MIMO multiusuario lo permite transferencia de datos con una muy baja latencia.
Al igual que el resto de dispositivos, el RUTC50 viene equipado con el RutOS, un sistema operativo propio de Teltonika que proporciona funcionalidades avanzadas en seguridad, incorpora protocolos industriales como Modbus, MQTT entre otro y es compatible con la plataforma Remote Management System (RMS) para acceso remoto y monitorización de grandes volúmenes de dispositivos.

Funciones
Mobile
- Mobile module5G Sub-6Ghz SA/NSA 2.4/3.4Gbps DL (4×4 MIMO), 900/550 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 210Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
- 3GPP ReleaseRelease 16
- SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
- StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- USSDSupports sending and reading Unstructured Supplementary Service Data messages
- Black/White listOperator black/white list (by country or separate operators)
- Multiple PDNPossibility to use different PDNs for multiple network access and services
- Band managementBand lock, Used band status display
- SIM idle protection serviceWhen working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
- APNAuto APN
- BridgeDirect connection (bridge) between mobile ISP and device on LAN
- PassthroughRouter assigns its mobile WAN IP address to another device on LAN
- Framed routingFramed routing: support an IP network behind 5G UE
Wireless
- Wireless mode802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO)
- Wi-Fi securityWPA2-Enterprise – PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
- SSID/ESSIDESSID stealth mode
- WiFi usersUp to 512 simultaneous connections
- Wireless Connectivity FeaturesWireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k)
- Wireless MAC filterWhitelist, blacklist
- Wireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login information.
Ethernet
- WAN1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network
- RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
- VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- FirewallPort forward, traffic rules, custom rules
- Firewall status pageView all your Firewall statistics, rules, and rule counters
- Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
- Network topologyVisual representation of your network, showing which devices are connected to which other devices
- DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
- QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNSSupported >25 service providers, others can be configured manually
- Network backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
- Load balancingBalance Internet traffic over multiple WAN connections
- HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
- SSHFSPossibility to mount remote file system via SSH protocol
Security
- AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator
- FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLANPort and tag-based VLAN separation
- Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
- WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access controlFlexible access control of SSH, Web interface, CLI and Telnet
VPN
- OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
- OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
- IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
- GREGRE tunnel, GRE tunnel over IPsec support
- PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
- StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPNMethod of building scalable IPsec VPNs
- SSTPSSTP client instance support
- ZeroTierZeroTier VPN client support
- WireGuardWireGuard VPN client and server support
- TincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support.
- TailscaleTailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
OPC UA
- Supported modesClient, Server
- Supported connection typesTCP
MODBUS
- Supported modesServer, Client
- Supported connection typesTCP, USB
- Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
- Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
- ProtocolHTTP(S), MQTT, Azure MQTT, Kinesis
- Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server
MQTT Gateway
- Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
- Supported modesStation, Outstation
- Supported connectionTCP
DLMS
- DLMS SupportDLMS – standard protocol for utility meter data exchange
- Supported modesClient
- Supported connection typesTCP, USB
API
- Teltonika Networks Web API (beta) supportExpand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
Monitoring & Management
- WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
- FOTAFirmware update from server, automatic notification
- SSHSSH (v1, v2)
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
- CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
- EmailReceive email message status alerts of various services
- TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTTMQTT Broker, MQTT publisher
- SNMPSNMP (v1, v2, v3), SNMP Trap
- JSON-RPCManagement API over HTTP/HTTPS
- RMSTeltonika Remote Management System (RMS)
IoT Platforms
- Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
- ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
- Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
System Characteristics
- CPUMediatek, Dual-core, 1.3 GHz, ARM Cortex A53
- RAM512MB DDR3
- FLASH storage16MB serial NOR flash, 512MB serial NAND flash
Firmware / Configuration
- WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
- FOTAUpdate FW
- RMSUpdate FW/configuration for multiple devices at once
- Keep settingsUpdate FW without losing current configuration
- Factory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration
FIRMWARE CUSTOMISATION
- Operating systemRutOS (OpenWrt based Linux OS)
- Supported languagesBusybox shell, Lua, C, C++
- Development toolsSDK package with build environment provided
- GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
Location Tracking
- GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
- CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEANMEA 0183
- NTRIPNTRIP protocol (Networked Transport of RTCM via Internet Protocol)
- Server softwareSupported server software TAVL, RMS
- GeofencingConfigurable multiple geofence zones
USB
- Data rateUSB 2.0
- ApplicationsSamba share, USB-to-serial
- External devicesPossibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
- Storage formatsFAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
Input / Output
- Input1 x Configurable digital Input, 0 – 6 V detected as logic low, 8 – 50 V detected as logic high
- Output1 x Configurable digital Output, Open collector output, max output 50 V, 300 mA
- EventsEmail, RMS, SMS
- I/O jugglerAllows to set certain I/O conditions to initiate event
Power
- Connector4-pin industrial DC power socket
- Input voltage range9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
- PoE (passive)Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC
- Power consumptionIdle: < 4.5 W, Max: < 13.5 W
Physical Interfaces
- Ethernet5 x RJ45 ports, 10/100/1000 Mbps
- I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
- Status LEDs4 x WAN status LEDs, 3 x Mobile connection type, 3 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi, 2 x WAN status
- SIM2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
- Power1 x 4-pin power connector
- Antennas4 x SMA for Mobile, 3 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
- USB1 x USB A port for external devices
- ResetReboot/User default reset/Factory reset button
- Other
1 x Grounding screw
Physical Specification
- Casing materialAnodized aluminum housing and panels
- Dimensions (W x H x D)130.4 x 42.6 x 103.4 mm
- Weight452 g
- Mounting optionsDIN rail, wall mount, flat surface (all require additional kit)
Operating Environment
- Operating temperature-40 °C to 75 °C
- Operating humidity10% to 90% non-condensing
- Ingress Protection RatingIP30
Productos relacionados

R5020 – router industrial 5G

R5020 Lite – router industrial 5G

RUTX50 – Router industrial 5G
Artículos relacionados

Los 10 mejores How-To sobre routers Teltonika del 2023

Equipos para telemedida IP

¿Cómo bloquear el acceso a Internet a determinados clientes LAN?
